지원되는 언어
Spellman 제품 파인더
사이트 검색
재설정 재설정
전압별 (kV)
전력별 (W)

도움이 필요하십니까?

도움이 필요하십니까?

원하시는 제품 검색에 어려움이 있으십니까? 기꺼이 도와드리겠습니다. 연락처 정보

카탈로그 다운로드

 Spellman Catalog

새로 보충된 Spellman의 153 페이지짜리 카탈로그는 고전압 산업 분야에서 가장 포괄적인 참고용 안내자료로서, 1.5W ~ 200kW 및 62V ~ 500kV규격의 70종류에 육박하는 여러 가지 전원장치 플랫폼들을 소개하였습니다.

저희 영어판 또는 일본어판 카탈로그를 다운로드하시려면 아래 바로가기 중 한 곳을 클릭하십시오.

: : 영어 (PDF 10 MB) 

Can I Operate a high voltage power supply designed for 220Vac, single phase from a 208Vac, three phase electrical service?

The simple answer is yes, if you connect any two phases of the 208Vac electrical service to the two AC input wires (solid brown and solid blue) you can operate the power supply. Connect the green/yellow wire to ground and ground the power supply properly along with making the required load return connections. But this simple answer needs some qualification.

220Vac, single phase has a typical tolerance of ±10%, so that means the low end could go to 200Vac. 208Vac, three phase also has a typical tolerance of ±10%, that means the low end could go to 187Vac. This is 13 volts lower than the "low end" of 220Vac, which is 200Vac. So it is possible that if using 208Vac to power a unit designed for 220Vac the input line could fall lower than the specified input voltage.

Is this a problem? It could be, but it’s possible it will not be an issue. The only time this situation could be problematic would be if the unit is being used at maximum voltage/maximum current…providing maximum power. Then if the input voltage falls below the 200Vac level the unit could possibly “drop out of regulation” creating a Regulation Error fault. The power supply will stop generating high voltage, it will not be damaged but this shut down could present process interruptions. If you are not using the power supply at maximum voltage/maximum current and maximum power than most likely the power supply will not create this fault condition.
Twitter facebook GooglePlus Tumblr Pinterest YouTube LinkedIn instagram

연락처 정보 | 홈페이지 | 회사 소개 | 사이트맵 | 개인 정보 보호 정책
Copyright © 2016, Spellman High Voltage Electronics Corporation | 475 Wireless Boulevard - Hauppauge, NY 11788 | Phone: +1 631 630 3000